The size of the inner frame is upgraded to 7.67 inches x 8.85 inches. Large cats and cats can be used, and smaller dogs can also be used.

Rotation control cat door in and out mode, 4 kinds of rotation modes, can be in or out, not in or out, only out but not in, only in and out

Easy to use, rotate the arrow to the icon to control the way in and out, clear and easy to understand

ABS material, front door frame transparent door, outer acrylic material, smooth surface, sturdy and durable

The inner frame is equipped with a silent brush to reduce noise

Easy to install, with installation screw pack and manual

Product parameter

Material: ABS+Acrylic

Colors: White, Black

Frame size: 25*5.5*29.5cm

Inner frame size: 19.5*22.5cm

Opening and closing method: rotating control

4 ways to enter and exit: can enter or exit, no entry but no exit, only exit but no entry, only entry but no exit

How to use: After the installation is complete, rotate one of the ways to enter and exit, pay attention to the rotation of the arrow to the icon

Packing method: color box

Things to know before buying:

1. The screws of the product are uniformly equipped, because the thickness of each door is different, if the screws are not suitable during installation, you need to buy them separately, please know

2. How to choose the size, it is recommended to find a piece of cardboard, use a ruler to draw the size of the inner frame, cut out the hole in the middle, and then let your favorite pet drill it for a try

installation steps:

1. Confirm the installation location of the door opening on your door. When looking for the location, you need to roughly estimate your pet

Through the height of the door opening (the average installation height is generally 10-15cm from the ground), use a ruler and pencil along the paper film to draw a precise cutting position on the door, mark the cutting line on the door, and mark 4 screws on the door The relative position of the holes

2. Before opening the hole, first take the four corners of the dotted line, use a 12mm rotor to make holes at 4 positions, and then use a chainsaw to cut your door along the dotted line until the cut door hole falls off the entire door

3. Before the formal installation of the door opening, place the cat door on the opened door opening and make a gesture, then install the cat door in the corresponding position, and tighten the 4 corner screws

(If it is a glass door, use a glass scribing tool to gently cut it open and fix it with glass glue)

Tools used: pencil, ruler, chainsaw, drill, screwdriver, tape measure, hammer, scissors, ruler

Note: Because the lighting effect will have a certain color difference when taking pictures, please refer to the actual product!

Packing list: 1*pet door, 1*accessory bag, 1*instruction